|
|
Features
- MEF 18 Certified
- Full VLAN support with priority and QoS
- TLS mode
- Units operate in back to back mode (CO and CPE mode)
- Multiple clock recovery mechanisms: Adaptive, Synchronous, Differential
- Multiple Encapsulation methods: MEF, IP, MPLS
- Extended SHDSL data rates
- Environmentally hardened for use in extreme conditions or remote cabinets (DC Models)
EtherXtend PWE3 Access Device
ETHX-3142, ETHX-3143
SHDSL EFM Pseudowire Access Device
Overview
The EtherXtend access devices with Pseudowire Emulation Edge to Edge (PWE3) (ETHX-3142, ETHX-3143) allow customers to extend TDM services over a packet based network. These access devices connect to TDM and Ethernet services simultaneously. The ETHX-31xx units allow a standard T1/E1 circuit to be transported over the EFM bonded connection. This eliminates the need to maintain a separate T1/E1 connection to customers who are using bonded Ethernet for their data needs. Customers can migrate their TDM applications to a more cost effective packet based network. These Pseudowire devices support multiple TDM clock recovery methods (Adaptive, Synchronous, Differential). This allows for accurate clock recovery in a variety of different network configurations.
Zhone's EtherXtend Family of Ethernet Access Devices (EADs) allow Carriers, CLECs, ISPs and PTTs to deliver Ethernet services to their customers simply, quickly and cost-effectively over the existing copper plant. Intended for deployment at end-users' locations, these devices allow delivery of IEEE 802.3ah Ethernet in the First Mile (EFM) services using the latest in SHDSL standards. The unit supports EFM loop bonding, thereby enabling up to 48 Mbps over four copper pairs, using the extended data rates. Because this is an EFM product, the loops can be at different rates, and still be part of the EFM bundle. This access device is equipped with an autorate capability that allows the unit to run at the maximum line rate supported by the copper loop. This autorate feature greatly simplifies installation and service provisioning.
Specifications
|
Dimensions (H x W x D)
2.0 in H x 8.7 in W x 6.2 in D
5 cm H x 22 cm W x 16 cm D
Weight
1.0 lb (0.45kg)
Power
48 VDC (DC Models)
100- 240 VAC 50/60 Hz (AC Models)
Interfaces
4 SHDSL Interfaces 8-pin modular
4 10/100 Ethernet Interfaces 8-pin modular
1 Serial (Craft) interface
2 T1/E1 Interfaces 8-pin modular for 100/120 Ohm (ETHX-3142)
2 E1 Interfaces BNC for 75 Ohm (ETHX-3143)
Standards Support
MEF 18
RFC 4553 (SAToP)
RFC 5086 (CESoPSN)
ITU G.8261, G.823, G.824,
ITU G.703
ITU Y.1413
ITU Y.1453, Y.1452
CTR 12/13, and ETS 30011
IEEE 802.3 Ethernet
IEEE 802.3ah EFM
IEEE 802.1Q/p VLANs
| |
Protocol Support
Telnet
SSH
HTTP
HTTPS
SNMP
Management
ZMS (Zhone Management System)
HTTP
SNMP
Command Line Interface (CLI)
Bandwidth/Distance
Up to 12 Mbps per SHDSL port
Up to 48 Mbps over four, loop-bonded ports
Distances up to 24,000 ft (7,320m)
Regulatory Compliance
EMC: FCC Part 15 Class A, ICES-003 Class A, EN55022 Class A, EN55024
Safety: UL60950-1, CSA C22.2 No. 60950-1, EN 60950-1.
CE Marking
Network: FCC Part 68, IC CS-03
Operating Requirements
Temperature:
0º C to 60º C ( 32º F to 140º F) (AC Model)
-40º C to 65º C (-40º F to 149º F) (DC model)
Storage Temperature:
-40ºC to 70ºC (-40ºF to 158ºF)
Humidity: 5% to 95%, non-condensing
|
More Information
Ordering Information
| ETHX-3142-EU |
PWE, 4 SHDSL EFM, 2 T1/E1(RJ), 4 Ethernet , AC EU |
| ETHX-3142-UK |
PWE, 4 SHDSL EFM, 2 T1/E1(RJ), 4 Ethernet, AC UK |
| ETHX-3142-US |
PWE, 4 SHDSL EFM, 2 T1/E1(RJ), 4 Ethernet, AC US |
| ETHX-3142-DC |
PWE, 4 SHDSL EFM, 2 T1/E1(RJ), 4 Ethernet, DC |
| ETHX-3143-EU |
PWE, 4 SHDSL EFM, 2 E1(BNC), 4 Ethernet, AC EU |
| ETHX-3143-UK |
PWE, 4 SHDSL EFM, 2 E1(BNC), 4 Ethernet, AC UK |
| ETHX-3143-US |
PWE, 4 SHDSL EFM, 2 E1(BNC), 4 Ethernet, AC US |
| ETHX-3143-DC |
PWE, 4 SHDSL EFM, 2 E1(BNC), 4 Ethernet, DC |
See our How to Buy Page for pricing and purchase info.
|
