You are here:
Products
›
IMACS200 :: IMACS 200
Features
- Voice, data, control & monitoring interfaces in a single, 2U high device
- IEEE 1613 certified with optional IEEE C37.94 optical interfaces for deployment in harsh environments
- Flexible powering options: -48 VDC, 125 VDC or 120/220 VAC with optional redundancy
- Powerful system maintenance features with same “Look & Feel” as existing IMACS platform
- Optimized for electrical utility sub-station applications
- Low initial first cost
- RoHS compliant
IMACS 200
Compact Integrated Multiple Access Communication Server
TDM Intelligent Channel Bank with Built in Cross Connect
Overview
The concept of an integrated one box solution for advanced voice and data applications began with the introduction of the IMACS. The IMACS 200 carries on that tradition with an integrated solution optimized for smaller port size applications that the IMACS could not economically address. An array of the most popular interfaces and features from the IMACS has been bundled into a small 2U chassis providing the ultimate in ease of installation.
Reliable communications are vital to any organization. The IMACS 200 addresses this need while providing compact size, low cost, and a high level of voice and data integration. This makes it an ideal choice for providing a variety of services to small end points and remote locations in any modern telecommunications network.
Optimized for the unique needs of electric utilities, the IMACS 200 system supports a wide range of specialty traffic, including teleprotection (EIA-232 and IEEE C37.94 optical interface to protection relays), SCADA, surveillance video, substation automation and alarms, radio, Ethernet and telephony.
In power substations, one of the biggest issues an access system must deal with is EMI from all the high voltage power equipment that is co-located. The IMACS-200 Optical WAN (OWAN) eliminates this problem by transporting the WAN facilities over DS1/E1 equivalent optical fibers. The OWAN can work up to 20 kilometers over a single mode, 1320nm, bi-directional optical port with FC connectors.
The IMACS 200 system offers a powerful array of integrated network diagnostic and fault isolation capabilities. These include Bit Error Rate Testers, test tone and signaling state generation, digital and analog loop back-support, and remote configuration and control. IMACS 200 meets stringent standards criteria, such as IEEE 1613, RoHS, and CE, which means you can deploy it anywhere in your network.
Specifications
|
Dimensions (H x W x D)
3.47 in. x 17.31 in. x 9.48 in.
8.8 cm x 44.0 cm x 24.1 cm
Weight
~10 lbs. (4.54 kg) depending on configuration
Power
Power Supply Options:
- -48 VDC
- 125 VDC
- 120/220 VAC
Optional redundant power supplies
Interfaces
4 - T1/E1
4 - 4 Wire E&M/TO
4 – 2 Wire FXS (600 ohm)
2 – V.35 (n x DS0)
5 – RS-232 (2.4, 4.8, 19.2, 28.8 and 38.4 kbps)
4 – alarm inputs
4 – alarm outputs (dry contacts)
1 – 10BaseT Ethernet
2 – IEEE C37.94 compliant serial data over fiber (optional)
2 – Optical T1/E1 WAN, Single fiber, 8 Mbps (optional)
Standards Support
IEEE 1613
RoHS
AT&T PUB 43801
ITU-T G712
TR62411
Voice Support
4 Wire E&M/TO
2 Wire FXS
| |
Protocol Support
Ethernet IEEE 802.3
RFC 1490 – Encapsulation
ARP, RIP and OSPF Bridging and routing
V.35
RS 232
IEEE C37.94
Management
RS-232 Serial VT-100 port
Ethernet Port
Command Line Interface (Menu based)
SNMP V2
Telnet
Regulatory Compliance
Safety:
- United States - UL 60950-1
- Canada - CSA C2.22 No. 60950-1
- European Union - EN 60950-1
- International/CB - IEC 60950-1 3rd Edition
EMC:
- United States - FCC Part 15 Class A
- Canada - ICES-03
European Union/CE Mark
- ETSI EN 300 386:2001:
- EN 55022 Class A
- EN 6100-4-2
- EN 6100-4-3
- EN 6100-4-4
- EN 6100-4-5
- EN 6100-4-6
- EN 6100-3-2 - N/A for DC
- EN 6100-3-3 - N/A for DC
Operating Requirements
Temperature: –40 °C to +70 °C
Humidity: 95 % max, non-condensing
|
More Information
Ordering Information
| IMACS-200-48VDC |
Base IMACS 200 System e/w a single -48 Vdc power supply |
| IMACS-200-RDNT-48VDC |
IMACS 200 System e/w redundant -48 Vdc power supplies |
| IMACS-200-48VDC-OHSU |
IMACS 200 System e/w a single -48 Vdc power supply and two C37.94 optical ports |
| IMACS-200-RDNT-48VDC-OHSU |
IMACS 200 System e/w redundant -48 Vdc power supplies and two C37.94 optical ports |
| IMACS-200-AC |
Base IMACS 200 System e/w a single 120/220 Vac power supply |
| IMACS-200-RDNT-AC |
IMACS 200 System e/w redundant 120/220 Vac power supplies |
| IMACS-200-AC-OHSU |
IMACS 200 System e/w a single 120/220 Vac power supply and two C37.94 optical ports |
| IMACS-200-RDNT-AC-OHSU |
IMACS 200 System e/w redundant 120/220 Vac power supplies and two C37.94 optical ports |
| IMACS-200-125VDC |
Base IMACS 200 System e/w a single 125 Vdc power supply |
| IMACS-200-RDNT-125VDC |
IMACS 200 System e/w redundant 125 Vdc power supplies |
| IMACS-200-125VDC-OHSU |
IMACS 200 System e/w a single 125 Vdc power supply and two C37.94 optical ports |
| IMACS-200-RDNT-125VDC-OHSU |
IMACS 200 System e/w redundant 125 Vdc power supplies and two C37.94 optical ports |
| Models with Optical WAN (OWAN)
|
| IMACS-200-48VDC-OW |
Base IMACS 200 System e/w a single -48 Vdc power supply and optical WAN |
| IMACS-200-RDNT-48VDC-OW |
IMACS 200 System e/w redundant -48 Vdc power supplies and optical WAN |
| IMACS-200-48VDC-OHSU-OW |
IMACS 200 System e/w a single -48 Vdc power supply and two C37.94 optical ports and optical WAN |
| IMACS-200-RDNT-48VDC-OHSU-OW |
IMACS 200 System e/w redundant -48 Vdc power supplies and two C37.94 optical ports and optical WAN |
| IMACS-200-AC-OW |
Base IMACS 200 System e/w a single 120/220 Vac power supply and optical WAN |
| IMACS-200-RDNT-AC-OW |
IMACS 200 System e/w redundant 120/220 Vac power supplies and optical WAN |
| IMACS-200-AC-OHSU-OW |
IMACS 200 System e/w a single 120/220 Vac power supply and two C37.94 optical ports and optical WAN |
| IMACS-200-RDNT-AC-OHSU-OW |
IMACS 200 System e/w redundant 120/220 Vac power supplies and two C37.94 optical ports and optical WAN |
| IMACS-200-125VDC-OW |
Base IMACS 200 System e/w a single 125 Vdc power supply and optical WAN |
| IMACS-200-RDNT-125VDC-OW |
IMACS 200 System e/w redundant 125 Vdc power supplies and optical WAN |
| IMACS-200-125VDC-OHSU-OW |
IMACS 200 System e/w a single 125 Vdc power supply and two C37.94 optical ports and optical WAN |
| IMACS-200-RDNT-125VDC-OHSU-OW |
IMACS 200 System e/w redundant 125 Vdc power supplies and two C37.94 optical ports and optical WAN |
See our How to Buy Page for pricing and purchase info.
Zhone's Single Line Multi-Service architecture (SLMS™), allows carriers to concurrently deliver voice, new premium data and video services over copper or fiber access lines.
|
PDF Format
