|
You are here:
Products
›
MALC-EFM-T1E1 :: EtherXtend T1/E1 EFM Line Card for MALC
Features
- Works in the MALC chassis alongside the most flexible family of line cards in the industry: from POTS to VDSL2, from T1 to PON.
- Compatible with all T1/E1 Network Extender products.
- Supports Loop Bonding using EFM or pre-standard bonding for maximum deployment flexibility.
- Automatic loop bonding with loop resiliency for highly reliable access.
- Full range of management options including SNMP, CLI, integration into Zhone's ZMS Enterprise Management System.
Related Information
EtherXtend T1/E1 EFM Line Card for MALC
MALC-EFM-T1/E1-24
EtherXtend line card for Ethernet over T1/E1
Overview
The EtherXtend T1/E1 line card (MALC-EFM-T1/E1-24) has been designed to deliver high-speed Ethernet services over T1 or E1. The line card provides high-density T1/E1 aggregation, using EFM for low-cost, easily managed transport. With advanced features such as Zhone's Multimedia Traffic Management (MTM) and fully integrated OAM (802.3ah compliant), the EtherXtend T1/E1 line card is ideal for delivering Ethernet over copper.
Supporting Ethernet bonding technologies over T1/E1 circuits, the MALC EFM T1/E1 line card is the most flexible Ethernet aggregation product available; delivering Ethernet access virtually anywhere.
The MALC-EFM-T1/E1-24 provides 24 individual T1 or E1 lines, allowing for data rates up to 1.54Mbps symmetrical bandwidth per port. The MALC-EFM-T1/E1-24 also supports loop bonding, which allows the service provider to bond multiple lines together for bandwidths of over 12Mbps (T1) or 16Mbps (E1) per end user. The EtherXtend T1/E1 line card is compatible with all existing T1/E1 Network Extender CPE, including the TNE1544 / ENE2044 and TNE1584 / ENE2084, which offer 4 or 8 ports of T1/E1 in a fully managed, hardened, carrier-class CPE. For lower cost deployments, the TNE1500 / ENE2000 and TNE1520 / ENE2020 endpoints provide single or dual line termination.
Specifications
|
Power
DC: -43.75V to -62V
Dual (A / B redundant) power feeds
Powered from MALC chassis
Interfaces
24 T1/E1 Interfaces (front panel)
Standards Support
IEEE 802.3 Ethernet
IEEE 802.3ah Ethernet in the First Mile
IEEE 802.3ah OAM
IEEE 802.1Q/p
| |
Protocol Support
Multicast IGMP v1 / v2
Host-based routing for per-interface single IP address assignments
Network-based routing for per-interface IP subnet address assignments
IP host and gateway support
RIP v1 (RFC 1058) RIP v2 (RFC 2453)
RFC 1483/2684 encapsulation
DHCP server (RFC 2131, 2132), DHCP Relay
Bridging 802.1D support
VLAN 802.1Q support
Dense / sparse multicast support
Integrated access control and content protection
Management
ZMS (Zhone Management System) via SNMPv2c for GUI and CORBA IDL machine interface
Terminal for Command Line Interface (CLI)
Out-band IP via 10/100 Ethernet or V.24 serial for async terminal
Bandwidth/Distance
Data rates provisionable up to 1.54Mbps symmetrical
Regulatory Compliance
NEBS level 3 compliant, RUS listed
Safety: UL 60950 3rd edition, CSA 950 3rd edition, EN 60950, AS / NZS 3260, TS 001
Emissions: EN 55022A, CFR47 PART 15A (FCC)
Immunity: NEBS GR-1089-Core level 3, EN 55024, EN 55082-1, T1.601-1992
Environmental: NEBS GR-63-Core level 3, GR-487, ETS 300 019-2-x, ISTA
Network Certification: FCC Part 68, CTR-12, CTR-13, DOC CS-03, TSO 16, GR-57
Telcordia OSMINE certification
Operating Requirements
Temperature: -40°C to 65°C
Non operating temperature: -40°F to 158°F (-40°C to 70°C)
Humidity: Up to 85%, non-condensing
Altitude: -200ft to 16,500ft (-60m to 5,000m)
|
More Information
Ordering Information
| MALC-EFM-T1/E1-24 |
24 port EFM T1/E1 line card for MALC 319, 719 & 723 chassis |
See our How to Buy Page for pricing and purchase info.
Zhone's Single Line Multi-Service architecture (SLMS™), allows carriers to concurrently deliver voice, new premium data and video services over copper or fiber access lines.
|
PDF Format