You are here:
Products
›
MALC-MTAC-ENH :: MALC MTA with POTS Ringer Card
Features
- Supports Redundant Active/Standby Operation
- Provide Internal or External Ring Generation
- Supports External Test Heads
- Provides External Network Clock Source
- External Alarm Inputs
- Environmentally Hardened
Related Information
MALC MTA with POTS Ringer Card
MALC-MTAC/RING-ENH
Metallic Test Access and Ring Generation Card with Integrated Metallic Test Capability
Overview
The MALC is a full-featured Broadband Loop Carrier (BLC) optimized for delivering voice, data, and video services over a pure packet access network. MALC gives carriers the flexibility to cost-effectively deliver Analog and Packet Voice services over existing facilities.
The MTAC/Ring cards provide metallic test access for external test systems to verify the local loop conditions, such as whether the loop will allow a particular service such as POTS or DSL to operate.
The MALC-MTAC/RING-ENH supports the following integrated test capability when the Integrated Software Test Feature is enabled.
-Calibration
-Foreign DC Voltage
-Foreign AC Voltage
-DC Loop Resistance
-3 Element Resistance
-5 Element Resistance
-3 Element Capacitance
-Receiver off hook
-Distance to Open
-Foreign AC Currents
-Ringer Equivalence
-DTMF and Pulse Digit Measurement
-Noise Measurement
-Signal to Noise Ratio
-Arbitrary Signal Tone Measurement
-Tone Generation
-Trans-hybrid Loss
-Draw and Break Dialtone
-Inward Current
-DC Feed Selftest
-On and Off-Hook Measurement
-Ringing Selftest
-Ringing Monitor
-Metering Selftest
-Transmission Selftest
-Dialing Selftest
-Howler Test
-Fuse Test
-Read Loop and Battery Conditions
Specifications
|
Power
Provided by MALC Chassis 300/700
Nominal Power Consumption 8W
Maximum Power Consumption 38W at full ringing load
MTAC/RING-FC: Maximum Power 31W with no ringing and 45W with maximum ringing load
Interfaces
RJ48 Test Access Port for External Test Head, Connects test head to 8 pin Metallic Bus on backplane
Serial control RS232D Port for Test Head Control
26 Pin D-sub connector that supports 12 Alarm closures for detecting various alarm types from collocated equipment. Supports isolated closure, ground and -48VDC closure
RJ48C accepts DS1 or E1 External clock reference, provisionable as system clock source
Voice Support
External ring generator voltage connector
Internal ring voltage sine wave generator (power ranges based on load from 15REN total @86VRMS, 45 REN @ 40VRMS)
| |
Management
Terminals
- ZMS (Zhone Management System) via SNMP v2c for GUI and CORBA IDL machine interface
- Terminal for Command Line Interface (CLI)
- Built-in GUI-based Management
Management Interfaces
- In-band IP over AAL5
- Out-band IP over 10 / 100 Base-T Ethernet or V.24 serial for async terminal
Regulatory Compliance
NEBS level 3 compliant
RUS listed
Safety: UL 60950 3rd edition, CSA 950 3rd
edition, EN 60950, AS / NZS 3260, TS 001
Emissions: EN 55022A, CFR47 PART 15A (FCC)
Immunity: NEBS GR-1089-Core level 3,
EN 55024, EN 55082-1, T1.601-1992
Environmental: NEBS GR-63-Core level 3,
GR-487 compliant, ETS 300 019-2-x compliant,
ISTA transportation and handling
Network Certification: FCC Part 68, CTR-12,
CTR-13, DOC CS-03, TSO 16, GR-57
Telcordia OSMINE certification
Operating Requirements
Ambient operating temperature: -40° C to +65° C
Relative operating humidity: up to 85% (non-condensing)
GR-487 compliant
Designed for outside plant deployment
|
More Information
Ordering Information
| MALC-MTAC/RING-ENH |
Metallic Test Access Card with Ring Generator, Supports Integrated Metallic Test Access |
| MALC-MTAC-TEST-700-INST |
Integrated Metallic Test Access Software (Factory Installed) |
| MALC-MTAC-TEST-700-RTU |
Integrated Metallic Test Access Software (Customer Installed) |
See our How to Buy Page for pricing and purchase info.
Zhone's Single Line Multi-Service architecture (SLMS™), allows carriers to concurrently deliver voice, new premium data and video services over copper or fiber access lines.
|
PDF Format