|
Power
Provided by MALC Chassis 300/700
Nominal Power Consumption 8W
Maximum Power Consumption 38W at full ringing load
Interfaces
RJ48 Test Access Port for External Test Head, Connects test head to 8 pin Metallic Bus on backplane
Serial control RS232D Port for Test Head Control
26 Pin D-sub connector that supports 12 Alarm closures for detecting various alarm types from collocated equipment. Supports isolated closure, ground and -48VDC closure
RJ48C accepts DS1 or E1 External clock reference, provisionable as system clock source
Voice Support
External ring generator voltage connector
Internal ring voltage sine wave generator (power ranges based on load from 15REN total @86VRMS, 45 REN @ 40VRMS)
| |
Management
Terminals
- ZMS (Zhone Management System) via SNMP v2c for GUI and CORBA IDL machine interface
- Terminal for Command Line Interface (CLI)
- Built-in GUI-based Management
Management Interfaces
- In-band IP over AAL5
- Out-band IP over 10 / 100 Base-T Ethernet or V.24 serial for async terminal
Regulatory Compliance
NEBS level 3 compliant
RUS listed
Safety: UL 60950 3rd edition, CSA 950 3rd
edition, EN 60950, AS / NZS 3260, TS 001
Emissions: EN 55022A, CFR47 PART 15A (FCC)
Immunity: NEBS GR-1089-Core level 3,
EN 55024, EN 55082-1, T1.601-1992
Environmental: NEBS GR-63-Core level 3,
GR-487 compliant, ETS 300 019-2-x compliant,
ISTA transportation and handling
Network Certification: FCC Part 68, CTR-12,
CTR-13, DOC CS-03, TSO 16, GR-57
Telcordia OSMINE certification
Operating Requirements
Ambient operating temperature: -40º C to +65º C
Relative operating humidity: up to 85% (non-condensing)
GR-487 compliant
Designed for outside plant deployment
|
