Features
- Works in the MXK chassis alongside the most flexible family of line cards in the industry: from POTS to VDSL2, from T1 to GPON.
- Compatible with all T1/E1 Network Extender products.
- Supports Loop Bonding using EFM or pre-standard bonding for maximum deployment flexibility.
- Automatic loop bonding with loop resiliency for highly reliable access.
- Full range of management options including SNMP, CLI, integration into Zhone's ZMS Enterprise Management System.
Related Information
T1/E1 EFM Line Card for MXK
MXK-EFM-T1/E1-24
Line card for Ethernet over T1/E1
Overview
The EFM T1/E1 line card (MXK-EFM-T1/E1-24) has been designed to deliver high-speed Ethernet services over T1 or E1. The line card provides high-density T1/E1 aggregation, using EFM for low-cost, easily managed transport. The EFM T1/E1 line card is ideal for delivering Ethernet over copper.
Supporting Ethernet bonding technologies over T1/E1 circuits, the MXK EFM T1/E1 line card is the most flexible Ethernet aggregation product available; delivering Ethernet access virtually anywhere.
The MXK-EFM-T1/E1-24 provides 24 individual T1 or E1 lines, allowing for data rates up to 2Mbps symmetrical bandwidth per port. The MXK-EFM-T1/E1-24 also supports loop bonding, which allows the service provider to bond multiple lines together for bandwidths of over 12Mbps (T1) or 16Mbps (E1) per end user. The EFM T1/E1 line card is compatible with all existing T1/E1 Network Extender CPE, including the TNE1544 / ENE2044 and TNE1584 / ENE2084, which offer 4 or 8 ports of T1/E1 in a fully managed, hardened, carrier-class CPE. For lower cost deployments, the TNE1500 / ENE2000 and TNE1520 / ENE2020 endpoints provide single or dual line termination.
Specifications
|
Power
Powered from MXK chassis
Interfaces
24 T1/E1 Interfaces (front panel)
Standards Support
IEEE 802.3 Ethernet
IEEE 802.3ah OAM
IEEE 802.1Q/p
| |
Protocol Support
Host-based routing for per-interface single IP address assignments
Network-based routing for per-interface IP subnet address assignments
IP host and gateway support
RIP v1 (RFC 1058) RIP v2 (RFC 2453)
RFC 1483/2684 encapsulation
DHCP server (RFC 2131, 2132), DHCP Relay
Bridging 802.1D support
VLAN 802.1Q support
Management
ZMS (Zhone Management System) via SNMPv2c for GUI and CORBA IDL machine interface
Terminal for Command Line Interface (CLI)
Out-band IP via 10/100 Ethernet or V.24 serial for async terminal
Bandwidth/Distance
Data rates provisionable up to 2Mbps symmetrical
Regulatory Compliance
Safety: UL 60950-1; CSA 60950-1; EN 60950-1
Emissions: EN 55022A*; PART 15A (FCC)
Immunity: GR-1089-CORE, Issue 3*; SR-3580, Issue 1*; ATT-TP-76200, Issue 14*; VZ.TPR.9205, Issue 3*
Environmental: GR-63-CORE, Issue 3*
*In process
Operating Requirements
Temperature: -40ºC to 65ºC
Non operating temperature: -40ºF to 158ºF (-40ºC to 70ºC)
Humidity: Up to 85%, non-condensing
Altitude: -200ft to 16,500ft (-60m to 5,000m)
|
More Information
Ordering Information
| MXK-EFM-T1/E1-24 |
24 port EFM T1/E1 line card for MXK |
See our How to Buy Page for pricing and purchase info.
|
