- Unmatched scalability, with initial 400G backplane and non-blocking 20G to every slot
- Superior intelligence and security with proven SLMS access operating system software
- Intuitive, comprehensive management, with CLI, WebUI, ZMS, and new Smart OMCI
- Flawless delivery of multi-play services over any FTTx or MSAP architecture
- Industrial temperature hardened
MXK: Intelligent Terabit Access Concentrator
MXK 319, 819, 823
Zhone's MXK Terabit Access Platforms truly scalable solutions for high-bandwidth applications
Demands on access networks are increasing at an accelerating rate, requiring a clean-sheet approach to a truly scalable multi-service architecture. Zhone's MXK intelligent terabit access concentrator reflects this new approach, with non-blocking capacity of up to 3,600 100Mbps GPON subscribers or 360 1G Active Ethernet subscribers per chassis. Beyond sheer bandwidth, MXK platforms leverage Zhone's well-proven SLMS access operating system for sophisticated service intelligence, to guarantee high quality of experience for subscribers, along with ease of management to address rising costs of network operation.
The MXK delivers these fundamental advances in access networking while meeting the full spectrum of baseline carrier-class requirements for multi-service hardware and software. For residential triple play and high-bandwidth business services over any FTTx architecture, the MXK solution sets a new performance benchmark for the industry.
The MXK family offers a wide range of options for FTTx solutions. It supports Active Ethernet and GPON line cards, and interoperates with indoor and outdoor ONTs. Supporting Active Ethernet and GPON on the same chassis allows service providers to configure their networks with maximum flexibility and efficiency, using a combination of GPON splitters and dedicated fiber connections.
The MXK family includes three fully-integrated form factors: 319 (19" rack x 3RU, with 7 slots for line cards), 819 (19" rack x 8RU, with 14 slots for line cards), and 823 (23" rack x 8RU, with 18 slots for line cards). The chassis support both front and rear power options and are equipped with a cable management tray, easy fan access, and redundant power feeds.
MXK Uplink Cards
MXK uplink cards offer a mix of multiple 10G and 1G interfaces to suit a variety of network designs. Several configurations are currently available, including 2x10G + 8x1G, 8x1G, 6X1G, 4X1G, and a low cost copper 4X1G-CU uplink. These cards support both copper and fiber SFPs, link aggregation, link redundancy, and the EAPS ring interface.
MXK Line Cards
The MXK platform supports GPON and Active Ethernet line cards for FTTX applications as well as seamless, same-chassis support of MSAN services including ADSL2+, VDSL2, G.SHDSL EFM, POTS, and T1/E1 PWE.
The 4- and 8-port GPON OLT line cards provide standards-based support of 2.5Gbps downstream and 1.25 Gbps upstream bandwidth. The largest MXK chassis can support up to 9,216 ONTs using Class B+ or C optics.
The Active Ethernet line cards provide up to 360 ports per chassis of 100/1000BT copper or 100/1000Mb fiber-based services. Operators can use a wide variety of SFPs on the same card.
Zhone's SLMS (Single Line Multi-Service) access operating system provides intelligent functionality across all the company's hardware products. Driven by 8 years of experience in commercial operation and collaboration with 700+ service providers worldwide, Zhone's SLMS delivers functionality critical to today's access networks in advanced networking, quality of experience, voice, security, and management.
To maintain tight security in the last mile, the MXK platform mounts considerable defenses, powered by all of Zhone's SLMS security features, including multicast control lists, secure bridging, broadcast suppression, dynamic IP filtering, SSH and SFTP, and RADIUS authentication.
The MXK product line integrates fully into the Zhone Management System (ZMS). Using ZMS, thousands of MXK nodes can be managed from remote locations. Customer provisioning, auto discovery, alarm aggregation, and maintenance can easily be performed without any service interruption.
Unlike vendors who have dodged the complexity of the ITU's G984.4 standard for GPON ONT management, Zhone provides a simple and clean interface to a fully standards-compliant OMCI implementation. Zhone's Smart OMCI approach allows the MXK OLT to interoperate with any vendor's ONT, yielding rapid ONT and service extension without OLT software upgrades. With Smart OMCI you can configure, obtain stats and support alarms on any ONT without hassle.
Zhone offers a full line of outside cabinets engineered specifically to support MXK platforms. Multiple configurations are available for deployments from small to large scales, with a wide range of powering, protection, and line termination options.
Dimensions (H x W x D)
- 3U: 5.25 x 17.25 x 11.15 in. / 13.3 x 43.8 x 28.3 cm
- Line Cards: 7; front card access
- 8U: 13.97 x 17.25 x 11.15 in. / 35.5 x 43.8 x 28.3 cm
- Line Cards: 14; front card access
- 8U: 13.97 x 21.18 x 11.15 in. / 35.5 x 53.8 x 28.3 cm
- Line Cards: 18; front card access
DC: -43.75V to -62V
Dual (A / B redundant) power feeds
MXK-UPLINK-2x10G-8x1GE:Uplink with 2 x 10G and 8 x 1G Ethernet Ports
MXK-UPLINK-8x1GE:Uplink with 8 x 1G Ethernet Ports
MXK-UPLINK-8x1GE:Uplink with 6 x 1G Ethernet Ports
MXK-UPLINK-4X1GE:uplink with 4 x 1G Ethernet Ports
VLAN 802.1Q with 802.1p
Multicast IGMP v2 and v3 (Snooping, proxy)
ITU G.984.1- 984.4 OMCI
IEEE 802.3ad LACP
| || |
- Terminal for Command Line Interface (CLI)
- Web GUI-based Management
- ZMS (Zhone Management System) via SNMP v2c for GUI, with CORBA IDL or XML OSS Gateway machine interface for OSS integration
- Fully ITU standards-compliant Smart OMCI implementation for ONT management
Safety: UL 60950-1; CSA 60950-1; EN 60950-1
Emissions: EN 55022A*; PART 15A (FCC)
Immunity: GR-1089-CORE, Issue 3*; SR-3580, Issue 1*; ATT-TP-76200, Issue 14*; VZ.TPR.9205, Issue 3*
Environmental: GR-63-CORE, Issue 3*
Ambient operating temperature: -40º C to +65º C
Relative operating humidity: up to 85% (non-condensing)
Designed for outside plant deployment
Uplinks & Line Cards
- 2 x 10G Ethernet + 8 x 1G Ethernet
- 8 x 1G Ethernet
- 6 x 1G Ethernet
- 4 x 1G Ethernet
Optical Based Line Cards:
- 4 Port GPON OLT
- 8 Port GPON OLT
- 20 Port Active Ethernet (High Performance/ High Density options)
Copper Based Line Cards:
- 24 port Basic Rate ISDN
- 24 port G.SHDSL EFM
- 48 port ADSL
- 72 port ADSL
- 48 port ADSL + Splitter
- 48 port ADSL + POTS combo
- 24 port VDSL2
- 24 port VDSL2 + Splitter
- 24 port VDSL2 + POTS combo
- 48 port VDSL2 wVectoring
- 24 port T1/E1 EFM
- 24 port T1/E1 PWE
- 72 port POTS
See our How to Buy Page for pricing and purchase info.
||8U, 19" Rack, 14 line-card slots, 2 uplink
||8U, 23" Rack, 18 line-card slots, 2 uplink
||3U, 19" Rack, 7 line-card slots, 2 uplink
||Uplink with 2 x 10G and 8 x 1G Ethernet Ports
||Uplink with 8 x 1G Ethernet Ports
||Uplink with 6 x 1G Ethernet Ports wClock
||uplink with 4 x 1G Ethernet Ports
||GPON Line Card with 4 OLT Ports, SFP based
||GPON Line Card with 8 OLT Ports, SFP based
||Active-Ethernet Line Card with 20 SFP based Ports
||Single Slot Active-Ethernet Line Card, SFP based, supporting 20 customers
||MXK ACTIVE ETHERNET LINE CARD SUPPORTING 20 CUSTOMERS, 100/1000MBPS, CSFP MSA compliant
||MXK VDSL2 48-port wVectoring
||MXK VDSL2 LINE CARD; BROADCOM BASED; SUPPORTS UP TO 17A PROFILE; 24 PORTS; SINGLE SLOT
||MXK VDSL2 PLUS POTS COMBO CARD; BCM BASED; SUPPORTS UP TO 17A PROFILE; 24 PORTS; SINGLE SLOT
||MXK VDSL2 SPLITTER CARD W/600 OHM; BROADCOM BASED UP TO 17A PROFILE; 24 PORTS; SINGLE SLOT
||MXK VDSL2 SPLITTER CARD W/900 OHM; BROADCOM BASED UP TO 17A PROFILE; 24 PORTS; SINGLE SLOT
||MXK, T1/E1 24 PORT PSEUDO WIRE LINE CARD
||MXK Basic Rate ISDN 24
||MXK POTS CARD WITHOUT SPLITTER, 72 PORTS
||MXK ADSL2+ LINE CARD WITH POTS, ANNEX A/M, 48 PORTS, 2 SLOT WIDE CARD WITH INTEGRATED RINGER
||MXK ADSL2+ CARD WITHOUT SPLITTER, 72 PORTS, ANNEX A, USING BROADCOM CHIPSET,ROHS
||24 port SHDSL EFM line card
||24 port T1/E1 EFM line card
||MXK OC3/STM1 line card
||Blank End Panel to cover unused Uplink Slot
||Blank End Panel to cover unused Line Slot
||REPLACEMENT FANTRAY ASSY FOR MXK 823 CHASSIS
||REPLACEMENT FANTRAY ASSY FOR MXK 819 CHASSIS
||ZMS TIER 1 LIC. (1-5K); CLIENT/SERVER SW W/CONFIG, FAULT, REAL-TIME STATS & DIAG FUNCT & ORACLE DB
||ZMS COLD STANDBY TIER 1 LIC. (1-5K); ZMS AND ORACLE DATABASE, REQUIRES PURCHASE OF ZMS-NMS-TR1
||ZMS TIER 2 LIC. (1-50K); CLIENT/SERVER SW W/CONFIG, FAULT, REAL-TIME STATS & DIAG FUNCT & ORACLE DB
||ZMS COLD STANDBY TIER 2 LIC. (1-50K); ZMS AND ORACLE DATABASE, REQUIRES PURCHASE OF ZMS-NMS-TR2
||ZMS TIER 3 LIC. (50K+); CLIENT/SERVER SW W/CONFIG, FAULT, REAL-TIME STATS & DIAG FUNCT & ORACLE DB
||ZMS COLD STANDBY TIER 3 LIC. (50K+); ZMS AND ORACLE DATABASE, REQUIRES PURCHASE OF ZMS-NMS-TR3
||ZMS OSS GATEWAY CORBA IDL INTERFACE. REQUIRES CORRESPONDING VERSION OF ZMS NMS.
||ZMS OSS GATEWAY XML INTERFACE. REQUIRES CORRESPONDING VERSION OF ZMS NMS.