|
You are here:
Products
›
SUD2000-12 :: SHDSL MicroDSLAM
Features
- Provides plug 'n' play operation, including automatic loop bonding lines with NO configuration requirements
- Small enough to fit in any remote terminal/street cabinet
- only 8.5" x 8.5" x 1.1" (2.8cm H x 21.6cm W x 21.6cm D)
-
- IP QoS Support for Traffic Management and Prioritisation
- 12 ports of SHDSL (2.3 Mbps symmetrical)
- Supports Loop Bonding from ports providing up to 27 Mbps over 12 bonded copper pairs
- Can be set to 'subscriber' mode, providing a 12 port loop-bonded CPE that can be used with the SIM2000-24, ESIM5700-48, EtherXtend products, or other SµD2011-12's
- NEBS compliant and environmentally hardened for remote deployment
SHDSL MicroDSLAM
SµD2011-12T, SµD2011-12E
Feature-rich SHDSL MicroDSLAM fits in any Remote Terminal/Street Cabinet
Overview
Zhone's SHDSL Ethernet MicroDSLAM is the industry's first Remote Ethernet DSLAMs that is environmentally hardened and small enough to fit in even the most crowded Remote Terminals/Street Cabinets. These units are extremely feature rich, including Loop Bonding, SNMP Management, IP QoS, and the ability to be used as both a compact CO device (DSLAM) or a high-density bonded modem (CPE).
SHDSL provides the high-speed, symmetrical bandwidth required by the small business, SOHO, or telecommuter, and Zhone's MicroDSLAM can bond copper loops together to increase total bandwidth to as high as 27Mbps at distances up to 12,000ft/3600 m. Loop bonding also allows for higher speeds at greater distances for end users further away from the Remote Terminal. With IP QoS included, Zhone's MicroDSLAM enables the Telco or service provider with additional service options and revenue opportunities such as VoIP and IPTV.
The SµD2011-12 can be used as a 12 port loop-bonded CPE, allowing for up to 12 copper pairs to be bonded together, providing up to 27 Mbps to a single subscriber. This loop bonding capability can be used as an access link using a Zhone SHDSL CPE with loop bonding support, such as the SNE2020G-S or SNE2040G-S or using a second MicroDSLAM configured as a CPE. The SµD2011-12 may also be used with Zhone's EtherXtend product family for easy migration to the latest Ethernet in the First Mile standards.
Specifications
|
Dimensions (H x W x D)
12-port models: 1.1" H x 8.5" W x 11.4" D (2.8cm H x 21.6cm W x 29cm D)
Weight
12-port: 2.5 lbs. (1.1 kg)
Power
DC: Dual -48 Volt DC terminal blocks
6-port: 21W at 48vdc
12-port: 30W at 48vdc
AC: Requires separate AC power supply (sold separately)
*actual power consumption will vary by model and use
Interfaces
12 SDSL ports (RJ-21; G.SHDSL, CAP, or 2B1Q)
(1) Ethernet (RJ-45) and (1) T1/E1 (RJ-48C) data backhaul
Standards Support
IEEE 802.3 Ethernet
IEEE 802.1p CoS
IEEE 802.1Q VLANs
IGMP Snooping - supports IGMPv1 and IGMPv2
SNMP MIB II
| |
Protocol Support
Tagging 802.1p
VLANs 802.1Q
Ethernet IEEE 802.3
IP QoS - - Configurable Priority scheme 802.1p, DiffServ, IP address range, Rate Limiting
Bandwidth/Distance
Selectable to 144Kbps, 272Kbps, 400Kbps, 528Kbps, 784Kbps, 1040Kbps, 1552Kbps, 2064Kbps, 2320Kbps
Distances up to 24,000ft/7,320m
Regulatory Compliance
EMC: FCC Part 15; CSA C108.8; EN55022; EN55024, CE Marking
Safety: UL1950, CSA C22.2 No. 950, EN60950, IEC950, CE Marking
Operating Requirements
Temperature: -40°F to 149°F (-40°C to 65°C)
Non-operating temperature: -40°F to 158°F (-40°C to 70°C)
Humidity: 5% to 95%, non-condensing
Altitude: -200ft to 16,600ft (-60m to 5,000m)
|
More Information
Ordering Information
| SµD2011-12T |
12 Port SHDSL MicroDSLAM -DC; supports (1)10/100 Ethernet Uplink, (1) T1 Uplink |
| SµD2011-12E |
12 Port SHDSL MicroDSLAM -DC; supports (1)10/100 Ethernet Uplink, (1) E1 Uplink |
See our How to Buy Page for pricing and purchase info.
Zhone's Single Line Multi-Service architecture (SLMS™), allows carriers to concurrently deliver voice, new premium data and video services over copper or fiber access lines.
|
PDF Format