|
|
Features
- Triple Play Services - IP Video, VoIP, High Speed Internet Access
- No New Home Wiring - HPNA supported simultaneously on Coax and Phone Line.
- Two Step Easy Installation - Install fiber enclosure without the need for electronics. Electronics can be installed after services are ordered.
- Broadband Remote Access - Allows consumer to VPN into the zNID and access home computers
- Remote Management - Web GUI, TR-069, and SNMP.
zNID - Zhone's Intelligent Ethernet NID
ZNID-ETH-4210, ZNID-ETH-4212
Active Ethernet NID with integrated intelligent gateway functionality.
Overview
The zNID is an intelligent NID supporting Ethernet fiber termination with full-featured gateway functionality providing an ideal solution for FTTH deployments.
Triple Play services - IPTV, POTS or VoIP, and High Speed Internet Access (HSIA) - over existing coax and/or phone line make service offerings and installations flexible and easy.
No New Home Wiring - HomePNAv3
The zNID 4200 product line is the first gateway on the market to support both HPNA over coax and phone line using two HPNA chipsets giving greater flexibility to service providers who want to take advantage of the network already installed in the user's home. The zNID 4200 is able to guarantee the best throughput possible over the coax network and the phone line network giving added flexibility when offering triple play services. HPNA over the existing coax and the existing phone line simultaneously virtually eliminates the need to run new cables.
Gateway Features
The zNID 4200 is a full-featured gateway supporting services such as DHCP server, ALG's, scheduling, VPN termination, comprehensive logging, and more. The zNID 4200 product line implements a very flexible QoS allowing the service provider to guarantee that services are being prioritized correctly and the end-user is getting the Quality of Experience that is expected.
Enclosure
The zNID 4200 enclosure is designed to provide outstanding reliability and simple installation. Reliability is achieved in outdoor installations by optimizing the design for heat dissipation without the need for rotating fans.
The enclosure can be installed in two stages for carriers wanting to terminate fiber before installing the active components. A small plastic enclosure can be installed first allowing the installer to terminate the fiber. Later, when the customer has ordered service, the active components are installed on top of the fiber enclosure for a clean appearance.
Specifications
|
Dimensions (H x W x D)
Fiber Tray
- 11.8 in. (30cm) high x 11.4 in. (29cm) wide x 2.7 in. (6.9cm) deep
Complete Enclosure
- 13.4 in. (34cm) high x 12.8 in. (32.5cm) wide x 3.9 in. (9.9cm) deep
Weight
7.1 lbs. (3.2 kg)
Power
Power options include:
- Outdoor battery backup
- Indoor battery backup
The zNID can be powered over an unused phone line pair eliminating the need to drill holes and pull thick power cables through exterior walls.
Interfaces
Uplink options:
- SC/APC connector
- SFP based
- OptiTap support
Common interfaces:
- 2x FXS (SIP or SIP-PLAR) - HPNA over phoneline shares voice line 1
- 3x RJ45 10/100Base-T
- 1x Coax type F connector for HPNA
Standards Support
Network Applications
- DHCP Server, DHCP Client
- DHCP proxy (BOOTP relay agent), RFC 1542
- DNS proxy (relay agent), DNS server
- Dynamic DNS
IP Routing and Bridging
- Static routing
- IP Multicasting
- Private Network Address Allocation
NAT
- NAT-NAPT
- Application Level Gateway (ALGs) modules
- Port triggering
- STUN pass through
Virtual LAN bridging (VLAN)
- 802.1P
- 802.1Q
PPPoE
- PPP Authentication Protocols, RFC 1334
-– PAP, RFC 1334
-– CHAP, RFC 1994
-– MS-CHAPv1, RFC 2433
-– MS-CHAPv2, RFC 2759
- PPP auto reconnect and configurable timeouts (Idle time)
- PPP over Ethernet (PPPoE), RFC 2516
- Multiple PPPoE connections
Firewall and Security
- Stateful Packet Inspection (SPI) Firewall
- Firewall support in bridge mode
- Comprehensive event logging
- Keep connections active during reconfiguration
- Denial of Service (DoS) protection
- Demilitarized Zone (DMZ)
- Access Control
- MAC address filtering
- Time of Day and day of week policies for firewall rules and access control
- TCP MTU clamping
QoS
- 802.1P/Q prioritization
- Diffserv (RFC2474, RFC2475) marking and queuing according to connection type, network interface, MAC, IP,
host name, DSCP/ToS value, port number and application
- Traffic shaping – bandwidth management and rate limiting
- Port based QoS
Voice Support
SIP
SIP PLAR
Codec Support: G.711, G.723, G.726, G.729
VAD, Silence suppression, comfort noise generation
Major CLASS features supported
RTP/RTCP
SDP
RTP payload for DTMF digits
5 REN per port
VoIP Qos
– Layer 3 QoS: control ToS and DSCP for VoIP RTP
- Prioritization of voice over data
| |
Management
TR-069
SNMP
Web GUI
Bandwidth/Distance
100BX Single-Fiber SC/APC
Up to 100 Mbps
Distance based on SFP (20 km)
Regulatory Compliance
UL
CSA
CE
FCC
Operating Requirements
-40C to +55C plus solar loading
|
More Information
Ordering Information
| ZNID-ETH-4210-1310TX-20K |
Ethernet 100Mbps ONT, 2x Voice, 3x FE, weather-proof enclosure, fiber tray, 1310tx 20km |
| ZNID-ETH-4210-1550TX-20K |
Ethernet 100Mbps ONT, 2x Voice, 3x FE, weather-proof enclosure, fiber tray, 1550tx 20km |
| ZNID-ETH-4212-1310TX-20K |
Ethernet 100Mbps ONT, 2x Voice, 3x FE, HPNA-coax, HPNA-phone line, weather-proof enclosure, fiber tray, 1310tx 20km |
| ZNID-ETH-4212-1550TX-20K |
Ethernet 100Mbps ONT, 2x Voice, 3x FE, HPNA-coax, HPNA-phone line, weather-proof enclosure, fiber tray, 1510tx 20km |
| ZNID-ETH-EL-4210-1310TX-20k |
Ethernet 100 Mbps ONT, Electronics only, 2x Voice, 3x FE, 1310tx, 20km |
| ZNID-ETH-EL-4210-1550TX-20k |
Ethernet 100 Mbps ONT, Electronics only, 2x Voice, 3x FE, 1550tx, 20km |
| ZNID-ETH-EL-4212-1310TX-20k |
Ethernet 100 Mbps ONT, Electronics only, 2x Voice, 3x FE, HPNA-coax, HPNA-phone line, 1310tx, 20km |
| ZNID-ETH-EL-4212-1550TX-20k |
Ethernet 100 Mbps ONT, Electronics only, 2x Voice, 3x FE, HPNA-coax, HPNA-phone line, 1550tx, 20km |
| ZNID-ENCL-FIBER |
zNID fiber termination enclosure used to terminate and store fiber. (GPON and Active Ethernet electronics sold separately.) |
| ZNID-ENCL-FIBER-OPTITAP |
zNID fiber termination enclosure used to terminate and store fiber. OptiTap support. (GPON and Active Ethernet electronics sold separately.) |
| ZNID-BATT-IN-XX |
zNID indoor power with battery backup. XX = NA, EURO |
| ZNID-BATT-OUT-XX |
zNID outdoor power with battery backup. XX = NA, EURO |
| HPNA-COAX-ETH-XX |
HPNA over coax with 2x RJ-45 Ethernet interfaces. XX = NA, EURO, UK |
| HPNA-PHONELINE-ETH-XX |
HPNA over phoneline with 2x RJ-45 Ethernet interfaces. XX = NA, EURO, UK |
See our How to Buy Page for pricing and purchase info.
|
