zNID 2400 Series Indoor GPON ONT

ZNID-GPON-2402, 2403, 2424, 2425, 2426 & 2427


Zhone's indoor residential 2400 Series GPON ONT is a standards based CPE designed for advanced triple-play deployments in Fiber-to-the-Home/Premise application. These indoor models in Zhone's zNID product line of ONTs provide a lower cost alternative to outdoor ONT solutions. The small package contains many features including QoS, VoIP, and multicast video support. The series include up to four 10/100/1000Mbps LAN Ports, two POTS FXS Voice ports and one RF video port in a compact enclosure for indoor use.

Supporting industry standard SIP and MGCP voice signaling provides reliable voice services. Zhone's experience with packet voice ensures interoperability and support with a large number of soft switches. The four Ethernet ports can be separated into different services allowing the configuration of dedicated ports for IP video and data.

Compliant with standard OMCI definition, the GPON 2400 Series ONTs are manageable at remote sites and supports the full range of FCAPS functions including supervision, monitoring and maintenance.

The GPON 2400 Series ONTs can be either wall mounted inside the home or placed freestanding on a desktop, and can be equipped with a battery backup for lifeline services.

Zhone provides the complete PON solution: ONT, OLT, splitter, EDFA, RF Transmitters, and cabinet solutions are available from Zhone allowing our customers to buy a complete and fully tested solution from one trusted source.

Categories: , .

Dimensions (H x W x D)
Complete Enclosure
1.5 in. H x 10 in. W x 6 in. D
3.8 cm H x 25.4 cm W x 15.2 cm D

1.0 - 1.2LB (0.45 - 0.54 kg)

12 VDC (DC Models)
100-240 VAC 50/60 Hz (AC Models)
Max Power: 15W

- SC/APC connector
- Full ITU-T G.984 compliance

- Upstream data rate 1.25 Gbps
- 1310nm optic
- Launch Power: 0.5 to +5 dBm

- Downstream data rate: 2.5 Gbps
- 1490nm optics
- Receiver Sensitivity: -27 dBm
- Input power overload: -8 dBm

- RJ-45 Jacks
- 4x10/100/1000 Base-T ports
- Meets IEEE 802.3 specifications
- Auto-MDI/MDIX and auto speed supported

- 2xRJ-11 connector

- Dual antenna
- 802.11b/g/n

RF Video Overlay
-1xF-type connector
-RF Output Level 18dBmV/ch
-Total RF output power 36dBmv
-RF Passband: 46 MHz-870 MHz

Wireless Support
2x2 MIMO
SSID support: 4
Max number of subscribers: 64
Maximum Tx power: 300 mW (-NA model); 100 mW (all other models including -EU and -UK models)
Antenna: 5dBi
64 bit and 128 bit WEP support
MAC address filtering

Standards Support
ITU-T G.984 compliant
IEEE 802.3 Ethernet
IEEE 802.1q/p VLANs
IEEE 802.3u Fast Ethernet
IEEE 802.3ab 1000Base-T

Voice Support
SIP (RFC 3261)
Codec: G.711 (u-law and A-law), G.729B, G726
DTMF dialing
5 REN per line
Echo cancellation
Voice Activity Detection and Comfort Noise Insertion
Caller ID, Call Waiting, Call Forwarding, Call Transfer, Three Way Calling, Distinctive Ringing
G.711 fallback for FAX
T.30 and T.38 FAX
DHCP client or static IP configuration

Protocol Support
- Fully ITU-T G.984 compliant framing
- 32 T-CONTs per device
- 32 GEM Ports per device
- Activation with automatic discovered SN and password in conformance with ITU-T

- AES-128 Decryption with key generation and switching
- FEC (Forward Error Correction)
- 802.1p mapper service profile on U/S
- Support for Multicast GEM Port

- Ethernet bridging/switching per IEEE 802.1D/802.1Q
- Traffic management (priority queuing and traffic shaping)
- QoS with support for IEEE 802.1p + DSCP

- Per port IEEE 802.1Q VLAN ID processing
- All VLAN IDs supported in Open Trunk Mode
- Maximum of 12 VLANs per LAN port in Filtered Trunk Mode
- VLAN tagging/untagging
- VLAN Stacking (QinQ)
- VLAN Switching
- SSID to VLAN Mapping

- IGMP v2/v3 Snooping
- VLAN support

Layer 2
- 802.3n flow control
- Automatic MAC learning and aging
- Unlimited # of MAC addresses for OMCI-configured flows
- Support for up to 4,096 MAC addresses for RG traffic flows
- Broadcast storm control

IP Routing and Firewall
- Port forwarding
- DHCP Server
- DNS Server

Web UI

Compliant with ITU-T G.984.5, Class B+
- APD receiver and DFB transmitter
- 0.5~+5dBm launch power, -27 dBm sensitivity, and -8dBm overload

Regulatory Compliance
FCC part B

Operating Requirements
Temperature: 0°C - +40°C
Humidity: 5 ~ 90% relative humidity

ZNID-GPON-2402-xx Indoor GPON ONT, 2xGE; xx = NA, UK, EU power supply
ZNID-GPON-2403-xx Indoor GPON ONT, 2xGE, 1xRF Video; xx = NA, UK, EU power supply
ZNID-GPON-2424-xx Indoor GPON ONT, 4xGE, 2xPOTS; xx = NA, UK, EU power supply
ZNID-GPON-2425-xx Indoor GPON ONT, 4xGE, 2xPOTS, 1xRF Video; xx = NA, UK, EU power supply
ZNID-GPON-2426-xx Indoor GPON ONT, 4xGE, 2xPOTS, WiFi; xx = NA, UK, EU power supply
ZNID-GPON-2427-xx Indoor GPON ONT, 4xGE, 2xPOTS, WiFi, RF Video; xx = NA, UK, EU power supply
See our How to Buy Page for pricing and purchase info.