Features
- Standard ITU G.984 GPON
- Triple-Play QoS
- VoIP with CLASS 5 Features
- Multicast video
- Built-in Layer-2 switch
zNID - Indoor GPON ONT
ZNID-GPON-2510A
Indoor Single Family Unit GPON ONT
Overview
Zhone's indoor residential GPON ONT are standards based CPE designed for advanced triple-play deployments. The indoor models in Zhone's zNID product line of ONT's provide a lower cost alternative to outdoor ONT solutions. The small package contains many features including QoS, VoIP, and multicast video support.
The zNID ONT is only one component in the PON network. Zhone provides the entire FTTx solution to our customers including the OLT, splitters, cabinets, and the ONT.
2510 indoor ONT is designed for high performance applications. It features 4 10/100Mbps LAN Ports and 2 POTS Voice FXS ports in a compact enclosure for indoor use. 2510 may be installed as a desktop or, wall mounted and is powered via an AC Adaptor.
2510 ONT is ideal for triple-play service deployments in Fiber-to-the-Home/Premise application. Industry standard SIP and H.248 voice signaling provides reliable voice services while Zhone's experience with packet voice ensures interoperability and support with a large number of soft switches. The four Ethernet ports can be separated into different services allowing the configuration of dedicated ports for IP video and data.
Compliant with standard OMCI definition, 2510 is manageable at remote side and supports the full range FCAPS functions including supervision, monitoring and maintenance.
Zhone provides THE complete PON solution: ONT, OLT, splitter, EDFA, RF Transmitters, and cabinet solutions are available from Zhone because our customers want to buy a complete and fully tested solution from one trusted source.
Specifications
|
Dimensions (H x W x D)
127mm x 170mm x 39mm
Power
Input: 110/240V AC Adaptor (12 VDC)
Power Consumption: 8-12W
Dying Gasp Support
Interfaces
GPON: SC/APC Connector
1.244Gbps Burst Mode Upstream Transmitter (1310nm)
2.488Gbps Downstream Receiver (1490nm)
Data: 4x 10/100 Base-T Ethernet
Voice: 2x RJ11
Standards Support
ITU-T G.984 compliant
Voice Support
5 REN per line, balanced Ring at 55V RMS, DTMF dialing
Multiple voice codec - G.711 (u/a-law), G.726, G.729 (A and B), G.723.1
T.30 and T.38 Fax
Echo Canceling, VAD, CNG
Various CLASS services - Caller ID, Call Waiting, Call Forwarding, Call Transfer, etc.
SIP (RFC3261), MEGACO v2 (H.248)
| |
Protocol Support
GPON
- Fully ITU-T G.984 compliant framing
- Multiple T-CONTs per device
- Multiple GEM Ports per device
- Support Single T-CONT mode and Multiple T-CONTs mode
- Flexible mapping between GEM Ports and T-CONT
- Activation with automatic discovered SN and password in conformance with ITU-T G.984.3
- AES-128 Decryption with key generation and switching
- FEC (Forward Error Correction)
- 802.1p mapper service profile on U/S
- Mapping of GEM Ports into a T-CONT with priority queues based scheduling
- Support for Multicast GEM Port
Ethernet / IP
- Bridging and switching (802.1D / 802.1 Q)
- Four traffic classes with 802.1p
- 802.3n flow control
- Up to 512 MAC address entries
- VLAN tagging / untagging
- VLAN stacking (Q-in-Q)
- MAC limiting
- 802.1x Ethernet Authentication
- PPPoE client
IPTV
- IGMP multicast
- IGMP snooping
Management
OMCI complies with G.984.4
Bandwidth/Distance
Compliant with ITU-T G.984.2 Amd1, Class B+
- APD receiver and DFB transmitter
- 0.5~+5dBm launch power, -27 dBm sensitivity, and -8dBm overload
Regulatory Compliance
CE (ETSI)
Operating Requirements
Operating Temperature: -5C to 45C
Operating Humidity: 5% - 90% non condensing
Storage Temperature: -20C to 60C
Storage Humidity: 5% - 95% non condensing
|
More Information
Ordering Information
| ZNID-GPON-2510A-xx |
Indoor GPON ONT, 4xFE, 2xPOTS xx = NA, UK, EU power supply |
See our How to Buy Page for pricing and purchase info.
|
