|
|
Features
- Triple Play Services - IP Video, VoIP, High Speed Internet Access
- No New Home Wiring - HPNA supported simultaneously on Coax and Phone Line eliminates the need to run new wires.
- Two Step Easy Installation - Install fiber enclosure without the need for electronics. Electronics can be installed after services are ordered.
- Remote Management - Web GUI, SNMP, and TR-069.
Related Products
Related Information
zNID - Zhone's Intelligent NID
ZNID-GPON-4201, 4202, 4203
GPON ONT with integrated intelligent gateway functionality.
Overview
The zNID is an intelligent NID supporting GPON termination with full-featured gateway functionality providing an ideal solution for FTTH deployments.
Triple Play services - IPTV, POTS or VoIP, and High Speed Internet Access (HSIA) - over existing coax and/or phone line make service offerings and installations flexible and easy.
No New Home Wiring - HomePNAv3.1
The zNID product line is the first gateway on the market to support both HPNA over coax and phone line using two HPNA chipsets giving greater flexibility to service providers who want to take advantage of the network already installed in the user's home. The zNID is able to guarantee the best throughput possible over the coax network and the phone line network giving added flexibility when offering triple play services. HPNA over the existing coax and the existing phone line simultaneously virtually eliminates the need to run new cables.
Gateway Features
The zNID is a full-featured gateway supporting services such as DHCP server, ALG's, scheduling, VPN termination, comprehensive logging, and more. The zNID product line implements a very flexible QoS allowing the service provider to guarantee that services are being prioritized correctly and the end-user is getting the Quality of Experience that is expected.
Enclosure
The enclosure can be installed in two stages for carriers wanting to terminate fiber before installing the active components. A small plastic enclosure can be installed first allowing the installer to terminate the fiber. Later, when the customer has ordered service, the active components are snapped into the fiber enclosure, allowing for a quick and easy installation.
Management
The zNID has a very intuitive Web interface. There is no need for the complex OMCI commands. The zNID is also managed by the Zhone Network Management System (ZMS), using SNMP. Software upgrades, or configuration backups are handled automatically by the ZMS.
Specifications
|
Dimensions (H x W x D)
Complete Enclosure
12.7 in. H x 9.9 in. W x 3.8 in. D
32.2 cm H x 25.1 cm W x 9.7 cm D
Weight
3.5 lbs. (1.6 kg)
Power
12 Vdc
Max Power: 15W
Power options include:
- Outdoor battery backup
- Indoor battery backup
The zNID supports the standard 7-pin power connector.
The zNID can be powered over an unused phone line pair, from the home, eliminating the need to drill holes and pull thick power cables through exterior walls.
Interfaces
Uplink options:
- SC/APC connector for GPON
- OptiTap support
Common interfaces for GPON:
- 2x FXS (SIP or SIP-PLAR) - HPNA over phone line shares voice line 1
- 3x RJ45 10/100Base-T
- 1x Coax type F connector for HPNA
HPNA:
--First phone line (4202)
--Coax (4202, 4203)
Standards Support
IEEE 802.3 Ethernet
IEEE 802.1Q/p VLANs
Network Applications
DHCP Server, DHCP Client
IP Routing and Bridging
NAT
Virtual LAN bridging (VLAN)
Firewall and Security
QoS
- 802.1P/Q prioritization
- Diffserv (RFC2474, RFC2475) marking and queuing
- Traffic shaping – bandwidth management and rate limiting
Voice Support
SIP
SIP PLAR
Codec Support: G.711, G.723, G.726, G.729
VAD, Silence suppression, comfort noise generation
Major CLASS features supported
5 REN per port
| |
Protocol Support
GPON uplink:
-ITU-T G.984 (GPON)
Management
Web GUI
SNMP
TR-069
ZMS (Zhone Management System)
Bandwidth/Distance
GPON interface with Class B+ optics (20km)
1310nm
- Launch Power:
-- Minimum 0.5 dBm
-- Average 2 dBm
-- Maximum +5 dBm
1490nm
- Sensitivity -28 dBm
Regulatory Compliance
EMC: FCC Part 15 Class A, ICES-003 Class A, EN55022 Class A, EN55024
Safety: UL60950-1, CSA C22.2 No. 60950-1, EN 60950-1
Network: FCC Part 68, IC CS-03
Operating Requirements
-40ºC to +60ºC
MTBF: greater than 100,000 hours
|
More Information
Ordering Information
| ZNID-GPON-4201 |
GPON ONT, Outdoor, 2x voice, 3x FE, with fiber termination enclosure. |
| ZNID-GPON-4202 |
GPON ONT, Outdoor, 2x voice, 3x FE, HPNA-Coax, HPNA-Phoneline, with fiber termination enclosure. |
| ZNID-GPON-4203 |
GPON ONT, Outdoor, 2x voice, 3x FE, HPNA-Coax, with fiber termination enclosure. |
| ZNID-GPON-4201-OPTITAP |
GPON ONT, Outdoor, 2x voice, 3x FE, with OPTITAP fiber termination enclosure. |
| ZNID-GPON-4202-OPTITAP |
GPON ONT, Outdoor, 2x voice, 3x FE, HPNA-Coax, HPNA-Phoneline, with OPTITAP fiber termination enclosure. |
| ZNID-GPON-4203-OPTITAP |
GPON ONT, Outdoor, 2x voice, 3x FE, HPNA-Coax, with OPTITAP fiber termination enclosure. |
| ZNID-GPON-4201-EL |
GPON ONT, Outdoor, 2x voice, 3 FE, Electronics only. (Fiber enclosure sold separately) |
| ZNID-GPON-4202-EL |
GPON ONT, Outdoor, 2x voice, 3 FE, HPNA-Coax, HPNA-Phoneline, Electronics only. (Fiber enclosure sold separately) |
| ZNID-GPON-4203-EL |
GPON ONT, Outdoor, 2x voice, 3 FE, HPNA-Coax, Electronics only. (Fiber enclosure sold separately) |
| ZNID-ENCL-420x |
zNID-420x fiber termination enclosure. (GPON electronics sold separately.) |
| ZNID-ENCL-420x-OPTITAP |
zNID-420x OPTITAP fiber termination enclosure. (GPON electronics sold separately.) |
| ZNID-ENCL-420x-STORAGE |
zNID-420x Slack cable storage enclosure. |
| ZNID-BATT-IN-XX |
zNID indoor battery backup. XX = NA, EURO, UK |
| ZNID-BATT-OUT-XX |
zNID outdoor battery backup. XX = NA, EURO, UK |
| HPNA-COAX-ETH-XX |
HPNA over coax with 2x RJ-45 Ethernet interfaces. XX = NA, EURO, UK |
| HPNA-PHONELINE-ETH-XX |
HPNA over phoneline with 2x RJ-45 Ethernet interfaces. XX = NA, EURO, UK |
See our How to Buy Page for pricing and purchase info.
|
