Software Increment Release Notes
================================

Increment ID:   I04A1730 
Date created:   05/01/00
CSR number:     UT03431, UI00512

Title: Problem deleting services after upgrade from AN15 to AN17.


Detailed Description of Increment:  
----------------------------------
This patch provides both a fix for the root cause and symptoms 
of this issue. The root cause is a problem in the conversion of 
termination id. The symptoms include problems deleting non-switched
services after upgrading from AN15 to AN17. This is caused by an 
invalid termination id in the database for the service. Please note 
that NEs upgraded to AN16 before AN17 are not affected.

System Configuration / Shelf Type Requirements:
-----------------------------------------------
ALL / NONE

Increments Needed:
------------------
I01A1730 - I03A1730

Loads Affected:
---------------
APU

Installation Instructions:
--------------------------
Download increment from the Web:
Either a) download the increment directly to the /iswd directory on the OPC.
       b) download the increment to tape and insert into the OPC tape drive.
Start up Incremental SW Del. from the Software Admin toolset on the OPC.

Deliver the increment:
  1) Select Deliver an Increment.

  2) Type y to verify your selection.

Verify the increment:
  1) From the ISD main menu, select Display Increments.

  2) Select Display to Screen.

  3) Verify the increment delivered have the correct Title
     and Description.  Also verify that their status is
     "READY TO APPLY".

     NOTE: If the increment is a Linecard only increment, the
     status will be "LOAD DELIVERED". 

  4) Press any key to return to the main menu.

Apply the increment:
  1) From the ISD main menu, select Apply an Increment.

  2) In the list, select the number next to the increment you delivered.

  3) Select on e of these options:
     1) Apply to ALL NEs (to set the increment fully into the system)
     2) Trial on one NE (to test the increment to ensure that it causes
        no problems)

     If you select option 2, a list of NEs in the span of control appears.
     From the list of NEs, select the number next to the one you want to
     test.  A confirmation screen appears.

  4) Type y to verify your selection.

  5) When the application is complete, press any key to scroll through
     the Summary screesn until you return to the main menu.
 
  6) From the main menu, select Display Increments.

  7) Select Display to Screen.

  8) Verify that the status next to each NE now reads "APPLIED"
     (or "TRIAL APPLIED" if you chose to run a test in step 3 above).

IF THE INCREMENT INVOLVES THE APU YOU MUST DO THE FOLLOWING STEP
Dump the image:
  1) From the ISD main menu, select Dump an APU Image.

  2) Select one of the valid load types that can be dumped.

  3) Select one of the valid NEs matching your previous parameters.

  4) Type y to verify your selection.

  5) When the image is complete, press any key to return to the main menu.


Test Instructions:
------------------
Verify that non-switched services, such as DDS and TR-08 that
were present before upgrading to AN17 can be deleted or changed
after application of the patch.