Software Increment Release Notes ================================ Increment ID: I25A1730 Date created: 12/20/2000 Title: ------ This increment adds updates for DDS circuits and STS-1 audits. Effect on Traffic / Warnings: ----------------------------- This increment has no effect on traffic. Detailed Description of Increment: ---------------------------------- 1. This increment maintains DDS cross connects after a processor activity switch by properly identifying the service type associated with those cross connects. 2. The STS-1 ping audit has been made more robust. STS-1 failures have been caused by pipe interrupts being permanently disabled. The audit has been improved to enable all STS-1 pipe interrupts when the system does not receive a response from a ping. System Configuration / Shelf Type Requirements: ----------------------------------------------- This increment must be applied to all AN17.30 AccessNode configurations and shelf types. This increment affects the APU. Prerequisite Increments Required: --------------------------------- Increments I01A1730 - I24A1730 must be successfully applied prior to application of this increment. Loads Affected: --------------- APU: ACCL17AS Special Instructions: --------------------- None. Installation Instructions: -------------------------- Please refer to the Incremental Software Delivery Users Guide for general installation instructions. This document may be obtained from either the AccessWeb ISD web site (https://www23.nortelnetworks.com/ACCESS_OPTICAL/esd/), where the AccessNode increments are located, or you may order it through your Nortel Account Manager or Order Manager. The document number for the Incremental Software Delivery Users Guide is P0934362. Test Instructions: ------------------ - Ensure properly provisioned and working DDS circuits survive a processor activity switch; the DDS circuits should not drop. Any switch of activity should be performed in the maintenance window. - There is no test procedure for the STS-1 ping audit robustness.