Software Increment Release Notes
================================

Increment ID:   I27A1730
Date created:   March 12, 2001


Title:
------
502 Line Card Weight Noise Test


Effect on Traffic:
------------------
None.


Detailed Description of Increment:  
----------------------------------
502 line cards now pass the weight noise test from the switch.


System Configuration / Shelf Type Requirements:
-----------------------------------------------
This increment must be applied to all AN 17.30 AccessNode configurations
and shelf types.  This increment effects the Accessnode Express Shelf
Processor.


Prerequisite Increments Required:
---------------------------------
Increments I01A1730 through I26A1730 must be successfully applied prior to 
application of this increment.


Loads Affected:
---------------
SP: ANXSPL17BW
LAIC application load: LAIC17BW
LAIC BOOT load: LAICBL17BW


Special Instructions:
---------------------
None.

Installation Instructions:
--------------------------
Download increment from the Web:
Either a) download the increment directly to the /iswd directory on the OPC.
       b) download the increment to tape and insert into the OPC tape drive.
Start up Incremental SW Del. from the Software Admin toolset on the OPC.

Deliver the increment:
  1) Select Deliver an Increment.

  2) Type y to verify your selection.

Verify the increment:
  1) From the ISD main menu, select Display Increments.

  2) Select Display to Screen.

  3) Verify the increment delivered has the correct Title
     and Description.  Also verify that the status is
     "READY TO APPLY".

     NOTE: If the increment is a Linecard only increment, the
     status will be "LOAD DELIVERED". 

  4) Press any key to return to the main menu.

Apply the increment:
  1) From the ISD main menu, select Apply an Increment.

  2) In the list, select the number next to the increment you delivered.

  3) Type y to verify your selection.

  4) When the application is complete, press any key to scroll through
     the Summary screen(s) until you return to the main menu.
 
  5) From the main menu, select Display Increments.

  6) Select Display to Screen.

  7) Verify that the status next to each NE now reads "APPLIED"
     (or "TRIAL APPLIED" if you chose to run a test in step 3 above).


Test Instructions:
------------------