|
Service & Support
Data50 Downloads
AccessNode Data 5.0 Software Increments
| Update |
Type |
Description |
Date Released |
Release Notes |
| uEMS |
|
In AD5.0, the pull-down menu for the individual circuit provides the option 'Show->Circuit Capabilities'. This new tool (along with the corresponding ATM load and 24+24 LC load) will allow this function to reflect to the craftsperson what sync mode is currently employed on the circuit. Possible return values to the command are-- T1.413 G.Lite, G.DMT, ADSL2, ADSL2+ and Unknown. To install this file, place it on the uEMS in the /opt/OV/bin/Zhone/HSTP/uems directory, and ensure that the read/write privileges are set to 755. |
|
N/A |
| Enhanced ATM-DS1 (NTNP37AA) |
|
Four issues are resolved in this load -- (1) In AD5.0, the ability to monitor traffic on the line circuit to the ATM is allowed, however the data presented did not accurately reflect the traffic on the circuit. This load will allow for more accurate data to be reflected when the craftsperson selects the "Monitor ATM stats" at the circuit level; (2) This load (along with the corresponding 24+24 LC load and uEMS tool) will allow the craftsperson to observe the sync mode that is currently employed on the circuit by using the option 'Show->Circuit Capabilities'. Possible return values to the command are-- T1.413 G.Lite, G.DMT, ADSL2, ADSL2+ and Unknown; (3) This load will resolve an issue where the 24+24 Combination Voice / Data card (NTNP49BA) would enter into the "config" state forever, and not complete; (4) This load will allow the craftsperson to be able to delete unused DS1 carriers. |
|
N/A |
| DS3 ATM Stand-Alone/Subtended (NTNP35AA) |
|
Three issues are resolved in this load -- (1) In AD5.0, the ability to monitor traffic on the line circuit to the ATM is allowed, however the data presented did not accurately reflect the traffic on the circuit. This load will allow for more accurate data to be reflected when the craftsperson selects the "Monitor ATM stats" at the circuit level; (2) This load (along with the corresponding 24+24 LC load and uEMS tool) will allow the craftsperson to observe the sync mode that is currently employed on the circuit by using the option 'Show->Circuit Capabilities'. Possible return values to the command are-- T1.413 G.Lite, G.DMT, ADSL2, ADSL2+ and Unknown; (3) This load will resolve an issue where the 24+24 Combination Voice / Data card (NTNP49BA) would enter into the "config" state forever, and not complete. |
|
N/A |
| ADSL2+ 24+24 Combination Voice/Data (NTNP49BA Rel 2) |
|
This new load for the NTNP49BA card resolves an issue where modems would intermittently either lose sync and not re-train, or would appear to be trained but would not pass data traffic. NOTE - This particular change requires that the NTNP49BA be a release 2 pack! If the card is not a release 2, this increment will load, and there will be no alarms or obvious failures, but only the first seven circuits will function. Circuits 8 through 24 will be non-functional on a release 1 NTNP49BA card with the new load installed. |
|
N/A |
| ADSL2+ 24+24 Combination Voice/Data (NTNP49BA Rel 1) |
|
In AD5.0, the pull-down menu for the individual circuit provides the option 'Show->Circuit Capabilities'. This new line card load (along with the corresponding ATM load and uEMS tool) will allow this function to reflect to the craftsperson what sync mode is currently employed on the circuit. Possible return values to the command are-- T1.413 G.Lite, G.DMT, ADSL2, ADSL2+ and Unknown. |
|
N/A |
Zhone's Single Line Multi-Service architecture (SLMS™), allows carriers to concurrently deliver voice, new premium data and video services over copper or fiber access lines.
|
