Paradyne Firmware/Software/Hardware Release Notes

PARADYNE - PROPRIETARY

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF PARADYNE CORPORATION AND IS NOT TO BE DISCLOSED OR USED EXCEPT IN ACCORDANCE WITH APPLICABLE AGREEMENTS.

Unpublished and Not for Publication

All Rights Reserved


 
Release Number: 04.01.11 Date: March 19, 2002
Release Type: Major Country Type: All
Release History
Affected Product Models
Release
Type
Date
Model
Description
04.01.11
Major
03/19/02
6310-A1/A2-xxx
Conversion to
6350-A1/A2-xxx*
 Initial Release

*NOTE:  This version of code is used to convert a 6310-A1/A2-xxx MVL end point to a 6350-A1/A2-xxx ReachDSL end point.  The model number of
the unit will change from 6310 to 6350. If an MVL end point is upgraded to ReachDSL, it cannot be used in a multi-drop configuration.

         1. Feature Enhancements / Functional Changes

    This release is the initial release for ReachDSL models 6310/6350-A1/A2-xxx.

    2. Resolved Customer Issues
     
     
    Action Request Number
    Description
    None
    		  

         3. Hardware Co-Requirements
    For proper operation with an 88xx/86xx DSLAM, this release requires an 8000 IP Conservative MCC, MCC Plus, or MCP with appropriate firmware:
     
     
    Card Type CCA # DSLAM
    6310/6350-A1 Reach DSL RTU 868-1247-8100 N/A
    6310/6350-A2 Reach DSL RTU 868-3527-8001 N/A
    8312 MVL 12 Port Card 868-3426-8201, Rev .80A 8610, 8810, 8820
    8314 MVL 12 Port Card 868-4427-8000, Rev 80A 8820, 8620
    8000 IP Conservative MCC 868-1010-81xx (xx = 00, 01, 02, …) 8600, 8800, 8810
    8000 IP Conservative MCC Plus 868-3882-80xx (xx = 00, 01, 02, …) 8600, 8800, 8810
    8000 IP Conservative MCP 868-3883-80xx (xx = 00, 01, 02, …) 8610, 8820, 8620
         4.  Software Co-Requirements

          The Port Card and Service Node release migration paths are specified in the “Release Migration Paths” (interopmatrix.pdf) document included with the firmware file.

            Following is a required upgrade process from MVL to ReachDSL:
                        1. MCP must be upgraded first
                        2. Port card upgrade must be performed after MCP upgrade
                        3. End Point upgrade should be performed last

     
        5. Compatibility With Other Released Models

•The 6350-A1/A2 release D04.01.11 is only to be used in conjunction with an 8312 or 8314 Reach DSL Port Card. The list of Port Card firmware releases and DSP revisions that interoperate with the 6350-A1 and the 6350-A2 are specified in the "ReachDSL/MVL Portcard and Endpoints Compatibility Matrix” document included with the firmware file. However, for optimal performance, it is strongly recommended the endpoint interoperates with a portcard that includes DSP version 4.10.20 or greater.
 

        6. SNMP MIBs Supported By This Release

This product is not SNMP managed.

        7. Firmware file included with this release

6310A1A2_conv_6350A1A2_040111.bin (DSL Download file)

6310A1A2_conv_6350A1A2_P040111.exe  (Ethernet Download Utility)

NOTE: Do not load this firmware in an 6310-A3/A4 modem.
 

AD8810