Paradyne Firmware/Software/Hardware Release Notes

PARADYNE - PROPRIETARY

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF PARADYNE CORPORATION AND IS NOT TO BE DISCLOSED OR USED EXCEPT IN ACCORDANCE WITH APPLICABLE AGREEMENTS.

Unpublished and Not for Publication

All Rights Reserved


Release Number: 04.03.05 Date: March 11, 2002
Release Type: Minor Country Type: All 
Release History
Affected Product Models
Release
Type
Date
Model
Description
04.03.05 Minor 03/11/02 6310-A3/A4-xxx conversion to 6350-A3/A4-xxx* Enhancement Release
04.01.12
Minor
12/21/00
6350-A3-xxx
 Enhancement Release
04.01.10
Major
12/13/00
6350-A3-XXX
 Initial Release 

*NOTE:  This version of code is used to convert a 6310-A3/A4-xxx MVL end point to a 6350-A3/A4-xxx ReachDSL end point.  The model number of the unit will change from 6310 to 6350.  Once the unit is upgraded, future upgrades should be upgraded using 6350 code.   If an MVL end point is upgraded to ReachDSL, it cannot be used in a multi-drop configuration.

1. Feature Enhancements / Functional Changes

          • MVL DSP Code Version 04.10.20

    • 6310-A4 and 6350-A4 Support
    The 6310-A4 and 6350-A4 are a new hardware design to include a new 5vdc power supply.
2. Resolved Customer Issues
     
    Action Request Number
    Description
    PDNaa04712
    		 TX Power not being set on endpoint 

    The resolution of this defect requires 8312/8314 Port Card firmware release 04.03.09 in addition to the 6350 and 6310 Endpoint firmware release 04.03.05.
3. Hardware Co-Requirements
    For proper operation with an 88xx/86xx DSLAM, this release requires an 8000 IP Conservative MCC, MCC Plus, or MCP with appropriate firmware:
     
    Card Type CCA # DSLAM
    6310/6350-A3 Reach DSL RTU 868-4453-8200 N/A
    6310/6350-A4 Reach DSL RTU 868-5277-8000 N/A
    8312 Reach DSL 12 Port Card 868-3426-8201, Rev .80A 8610, 8810 and 8820
    8314 Reach DSL 12 Port Card 868-4427-8000, Rev 80A 8820, 8620
    8000 IP Conservative MCC 868-1010-81xx (xx = 00, 01, 02,…) 8600, 8800, 8810
    8000 IP Conservative MCC Plus 868-3882-80xx (xx = 00, 01, 02,…) 8600, 8800, 8810
    8000 IP Conservative MCP 868-3883-80xx (xx = 00, 01, 02,…) 8610, 8820, 8620
4. Software Co-Requirements

The Port Card and Service Node release migration paths are specified in the Release Migration Paths document included with the firmware file.

Following is a required upgrade process from MVL to ReachDSL:
                    1. MCP must be upgraded first
                    2. Port card upgrade must be performed after MCP upgrade
                    3. End Point upgrade should be performed last
 

5. Compatibility With Other Released Models

• The 6350-A3/A4 release D04.03.05 is only to be used in conjunction with an 8312 or 8314 Reach DSL Port Card. The list of Port Card firmware releases and DSP revisions that interoperate with the 6350-A4 and the 6350-A3 are specified in the “ReachDSL/MVL Portcard and Endpoints Compatibility Matrix” document included with the firmware file. However, for optimal performance, it is strongly recommended the endpoint interoperates with a portcard that includes DSP version 4.10.20 or greater.
 

6. SNMP MIBs Supported By This Release

This product is not SNMP managed.

7. Firmware file included with this release

6310A3A4_conv_6350A3A4_040305.bin (DSL Download file)

6310A3A4_conv_6350A3A4_P040305.exe  (Ethernet Download Utility)
 
 

AD8810