Paradyne Firmware/Software/Hardware Release Notes
PARADYNE - PROPRIETARY
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF PARADYNE CORPORATION AND IS NOT TO BE DISCLOSED OR USED EXCEPT IN ACCORDANCE WITH APPLICABLE AGREEMENTS.
Unpublished and Not for Publication
All Rights Reserved
|
Release Number: 03.01.02 |
Date: November 2, 2000 |
|||
|
Release Type: Initial |
Country Type: All |
|||
|
Release History |
Affected Product Models |
|||
|
Release |
Type |
Date |
Model |
Description |
|
Major |
05/31/00 |
6310-A3-XXX |
Initial Release |
|
|
|
|
|
||
• Change to support -5, -8, and -11 TxOffHook Powers.
• Incorporated new DSP code ver 04.01.00
|
Action Request Number |
Description |
|
N/A |
|
|
|
|
For proper operation with an 88xx/86xx DSLAM, this release requires an 8000 IP Conservative MCC, MCC Plus, or MCP with appropriate firmware:
|
Card Type |
CCA # |
DSLAM |
|
8312 MVL 12 Port Card |
868-3426-8201, Rev .80A |
8610 and 8820 |
|
8314 MVL 12 Port Card |
868-4427-8000, Rev 80A |
8820 |
|
8000 IP Conservative MCC |
868-1010-81xx (xx = 00, 01, 02, …) |
8600, 8800, 8810 |
|
8000 IP Conservative MCC Plus |
868-3882-80xx (xx = 00, 01, 02, …) |
8600, 8800, 8810 |
|
8000 IP Conservative MCP |
868-3883-80xx (xx = 00, 01, 02, …) |
8610 and 8820 |
|
Card Type |
CCA # |
Firmware |
|
8312 MVL 12 Port Card |
868-3426-8201, Rev .80A |
02.01.48 or greater |
|
8314 MVL 12 Port Card |
868-4427-8000, Rev 80A |
02.01.48 or greater |
|
8000 IP Conservative MCC |
868-1010-81xx (xx = 00, 01, 02, …) |
04.01.21 or greater |
|
8000 IP Conservative MCC Plus |
868-3882-80xx (xx = 00, 01, 02, …) |
04.01.21 or greater |
|
8000 IP Conservative MCP |
868-3883-80xx (xx = 00, 01, 02, …) |
04.01.21 or greater |
• 6310-A1 RTUs should not be used in a multi-point configuration on 8312 MVL line cards.
• 6310-A2 and 6310-A3 RTUs can be used in a multi-point configuration and can be mixed, ie. , user can utilize -A2s and -A3s multi-dropped on the same port.
• If loop length is greater that 8k better performance is achieved if there is at least one -A3 endpoint in the configuration.
Port Card to End Point Release Compatibility Matrix
|
Port Card End Point Release |
8310 2.0.XX |
8310/8312 2.1.XX |
8312/8314 3.1.XX |
8312/8314 3.1XX |
||||
|
6310-A1/A2 2.0.XX |
MD |
C |
|
|
|
|||
|
6310-A1/A2 2.1.XX |
|
MD |
C |
|
|
|||
|
6310-A1/A2 3.1.XX |
|
MD |
C |
MD |
C |
MD |
C |
|
|
6310-A3 3.1.XX |
|
MD |
C |
MD |
C |
MD |
C |
|
|
|
|
|
|
|
||||
MD = Multidrop supported C = Compatible Empty = Not compatible
NOTE: Do not load this firmware in an 6310-A1 or 6310-A2 modem.