In the example below test was used for the user login and t is the password on the FTP server. The code was unzipped to c:\ftproot\6381_3010

telnet to 192.168.1.1

BusyBox on (none) login: root

Password: Admin is the default password

BusyBox v0.61.pre (2005.03.04-18:41+0000) Built-in shell (ash)

Enter 'help' for a list of built-in commands.

the FTP server IP is 192.168.1.2

the FTP server login is test password is t

6381_3010 is the directory where the files are stored

install is a script found in the 6381_3010 directory

example below shows the command that should be executed from within the 6381 after telneting and logging into the unit.

etc/run ftp 192.168.1.2 test t 6381_3010 install

Protocol: ftp

IP: 192.168.1.2

User: test

Password: t

Dir: 6381_3010

Cmd: install

ping 192.168.1.2

OK

get install

OK

run install

Checking Model Number ProductID 6381-A2-200

OK

Current Firmware VERSION=R3.00.09

OK

Boot Loader

OK

Getting crc

OK

Validating 6381A_R30010.bin

OK

Validating 6381A_R30010.img

OK

Looking for Alternate Filesystem

OK

Preparing for upgrade

OK

FLASH UPDATE IN PROGRESS: DO NOT REMOVE POWER UNTIL COMPLETE

Installing 6381A_R30010.bin in /dev/mtdblock/1

OK

Installing 6381A_R30010.img in /dev/mtdblock/4

OK

Swapping Filesystems

OK

Restarting in 10 seconds...